The only difference between Blinxi and Bloom lighting lies in their attachment system: Blinxi lighting is removable thanks to its magnetic attachment system. The Bloom lighting sticks permanently to a helmet thanks to the double-sided 3M located on its back.

They fit most helmets. If you can stick the Blinxi's metal backing to your headset, that means you'll be able to use it. Here are the dimensions of the metal headphone stand: 2.3 cm high x 6 cm wide. The Bloom is equipped with a double-sided 3M approximately 2.3 cm high x 6 cm wide.

Blinxi and Bloom are composed of 4 red LEDs and 2 orange LEDs for the indicators. In total, the device has 6 LEDs.

A 2032 battery is required to use the remote control. This battery is provided in the box when you receive your product. It can be replaced by removing the 3 screws located on the back of the remote control using a Phillips screwdriver. Everything is indicated in the product instructions.

The indicator sound reminder can actually be turned off by the user. The procedure is very simple: with your Blinxi or Bloom lighting off, hold down the ON/OFF button for 4 seconds until you hear a beep. This indicates that the indicator sound reminder has been modified (deactivated or reactivated). Follow the same procedure to reactivate it.

Yes. We paid great attention to this specific point, because we know that users also ride on rainy days. For us, this is an essential feature!

No. Blinxi and Bloom are made for everyone. Today, you have many more ways to get around cities: on electric scooters, on monowheels, on skateboards... All these users, as well as cyclists, must be visible in traffic. And they also need to be able to indicate their direction, to be more predictable and therefore safer. Blinxi and Bloom are therefore aimed at all road users, whatever their means of travel.

We chose elastic straps to secure the remote because we knew it could be the most universal way to do it. But we have innovated by offering the possibility of using 2 straps instead of just one to be sure that our remote control fits any handlebar. That said, you can attach your remote control to handlebars up to 32 mm in diameter without any problem.

Unfortunately, this is not possible. We made a choice by offering 3 different lighting modes (steady, flashing and day) but without adjusting the intensity, as this would have considerably increased the price of the products.

Of course ! We created these products so that you are visible but also predictable in traffic. And day mode is made for that. When using this mode, only the turn signals are activated and they are bright enough to be visible. So using Blinxi and Bloom in day mode will allow you to indicate your direction while riding, which will be much safer.

Concerning their autonomy, everything depends on the lighting mode selected:

Flashing mode: 10H

Fixed mode: 8H

Day mode: +24H

Yes quite. We sell additional media sets on our site.

The Blinxi hanging system is patented. It is a combination of magnetism and mechanical fixation. So, with the combination of the 2, we are confident enough to tell you that if the support is correctly glued to the helmet (and especially not upside down) and that Blinxi is correctly attached to the support (see the instructions), it will not there is no risk of loss.

Yes. Watch the tutorial video, further up on this page.

No, there is no charger in the box. Only a USB cable. Quite simply because we believe that there was no need to add another charger into your daily life, make you pay more for such an item that most of you already have and preserve the environment by not providing not an unnecessary device.