Discover the 8 red & white lighting modes offered by the Overade Lum , to adapt your bike helmet lighting to the light and dangerous conditions of urban traffic. 5 red, 3 white, powerful, and not dazzling.

• night steady red: 9 lumens, 16 hours of autonomy
• day steady red: 35 lumens, 7h30 battery life
• red pulse: 90 lumens, 8 hours of autonomy
• night flash red: 9 lumens, 21 hours of autonomy
• red day flash: 50 lumens, 8 hours of battery life
• night steady white: 35 lumens, 19 hours of autonomy
• day steady white: 100 lumens, 6 hours of autonomy
• white pulse: 100 lumens, 11 hours of autonomy

The little extra? When you turn off the product, the last mode remains in memory.

The Overade Lum or the Overade Turn work with the same patented mechanical-magnetic grip.

1. For the first installation I remove the film, and stick my magnetic support to the back of the helmet.
2. Then to install the lighting, I tilt it and insert it onto the small teeth.
3. I release it: it is attracted and frozen by the magnets.

Yes. We paid great attention to this specific point, because we know that users also ride on rainy days. For us, this is an essential feature!

No. The Lum (or all our other lighting) is made for everyone. Today, you have many more ways to get around cities: on electric scooters, on monowheels, on skateboards... All these users, as well as cyclists, must be visible in traffic. And they also need to be able to indicate their direction, to be more predictable and therefore safer. Our lights are therefore aimed at all road users, whatever their means of travel.

Of course ! We created our lighting so that you are visible but also predictable in traffic. And day mode is made for that. Using this mode, only the indicators and the Brake Light are activated and they are bright enough to be visible.

A very powerful flash mode is also widely visible from afar, even in direct sunlight.

Yes quite. We sell additional media sets on our site.

The Lum's hanging system is patented. It is a combination of magnetism and mechanical fixation. So, with the combination of the 2, we are confident enough to tell you that if the support is correctly glued to the helmet (and especially not upside down) and that the Turn is correctly attached to the support, there is no risk of loss.

The TURN lighting has 5 red lighting modes, a 6th mode called “day mode”, and right/left turn signals.

The LUM lighting has 5 red lighting modes, a 6th mode called “day mode”, as well as 3 white lighting modes in order to be positioned forward.

The power and autonomy of the LUM and TURN lighting vary depending on the lighting modes. The autonomy is between 6:30 and 21 hours and the maximum power is 100 lumens.

No. When you buy TURN and LUM lights in a pack with other products (OxiMote remote control or OxiBrake brake handle), they are already paired together so you won't have to do anything. However, you can purchase additional products. In this case you will have to pair them. The entire pairing procedure, very simple, is described precisely in the product instructions. Furthermore, no application is necessary to
pairing and for the use of TURN and LUM lighting.

Yes. You can pair as many TURN and LUM lights as you want to a single OxiBrake brake lever. You will need to pair the products one after the other, according to the procedure indicated in the lighting instructions.

They fit most helmets. If you can stick the metal backing to your headset, that means you can use them on it. Here are the dimensions of the metal headphone stand: 2.3 cm high x 6 cm wide.

Yes quite. We sell additional metal bracket sets on our site.

The hanging system is patented. It is a combination of magnetism and mechanical fixation. So, with the combination of the 2, we are confident enough to tell you that if the metal support is correctly glued to the helmet (especially not upside down) and
that the TURN or LUM lighting is correctly attached to the support (see the instructions), there is no risk of loss.

Yes, thanks to our universal attachment kit you can attach your lights to a seat tube, a handlebar, a luggage rack, a backpack, a sports helmet,... anywhere in fact! Please note, this fastener kit is sold separately.

No, there is no charger in the box. Only a USB cable. Quite simply because we believe that there was no need to add another charger into your daily life, make you pay more for such an item that most of you already have and preserve the environment by not providing not an unnecessary device.