Les produits correspond à la description du site et de très très bonne qualité merci
Très bon produit facile à installer, paramétrer et utiliser
LIFE - Tutorials
How to charge the Life?
Lift the silicone cap, under the nozzle of the product, and plug in a USB-C cable. The LIFE works with 5V classic USB-C, fast USB-C charging.
How to turn the front white lighting off/on?
The LIFE allows its user to activate or deactivate white lighting. Like activating the turn signal sound, it is a choice to make and it is "recorded" in the helmet.
How do I know the remaining battery level?
Each time you turn on the product, the central LED gives you an indication of the battery level: green, there is enough battery remaining. Red, it's time to think about recharging it.
How to pair a LIFE headset with an OxiMote?
You can connect up to 5 remote controls (OxiMote / OxiBrake combined) to the same lighting.
How to pair the LIFE with an OxiBrake?
An infinite number of lights/helmets can be paired to the same remote control (OxiMote - OxiBrake). And you can connect up to 5 remote controls (OxiMote / OxiBrake combined) to the same lighting/helmet.
How to change / turn off the turn signal sound?
With the headset "off", press the power button and hold it until you hear a "beep" or after 5s. Then you can release, the next sound mode is engaged and saved. There are 3 modes: normal, strong, off. Continue the manipulation to return to the original mode.
How to delete pairings / return LIFE to factory mode?
The reset function allows the lighting to “forget” the pairing with the OxiBrake or OxiMote remote controls. It also resets the lighting (sound in normal mode, etc.) To do this, start pairing, and press the button 3x quickly once the LED in the center starts flashing orange.
Need help ?
Details on Lighting Modes
Overade Turn & Brake offers you 5 red lighting modes which allow you to adapt your bicycle helmet lighting to the light and dangerous conditions of urban traffic.
The little extra? When you turn off the product, the last mode remains in memory.
The Overade Lum or the Overade Turn work with the same patented mechanical-magnetic grip.
Yes. We paid great attention to this specific point, because we know that users also ride on rainy days. For us, this is an essential feature!
No. The Turn (or all our other lights) are made for everyone. Today, you have many more ways to get around cities: on electric scooters, on monowheels, on skateboards... All these users, as well as cyclists, must be visible in traffic. And they also need to be able to indicate their direction, to be more predictable and therefore safer. Our lights are therefore aimed at all road users, whatever their means of travel.
Of course ! We created our lighting so that you are visible but also predictable in traffic. And day mode is made for that. Using this mode, only the indicators and the Brake Light are activated and they are bright enough to be visible.
A very powerful flash mode is also widely visible from afar, even in direct sunlight.
Yes quite. We sell additional media sets on our site.
The Turn's hanging system is patented. It is a combination of magnetism and mechanical fixation. So, with the combination of the 2, we are confident enough to tell you that if the support is correctly glued to the helmet (and especially not upside down) and that the Turn is correctly attached to the support, there is no risk of loss.
The TURN lighting has 5 red lighting modes, a 6th mode called “day mode”, and right/left turn signals.
The LUM lighting has 5 red lighting modes, a 6th mode called “day mode”, as well as 3 white lighting modes in order to be positioned forward.
The power and autonomy of the LUM and TURN lighting vary depending on the lighting modes. The autonomy is between 6:30 and 21 hours and the maximum power is 100 lumens.
No. When you buy TURN and LUM lights in a pack with other products (OxiMote remote control or OxiBrake brake handle), they are already paired together so you won't have to do anything. However, you can purchase additional products. In this case you will have to pair them. The entire pairing procedure, very simple, is described precisely in the product instructions. Furthermore, no application is necessary to
pairing and for the use of TURN and LUM lighting.
Yes. You can pair as many TURN lights as you want to a single OxiMote remote control. You will need to pair the products one after the other, according to the procedure indicated in the lighting instructions.
Yes. You can pair as many TURN and LUM lights as you want to a single OxiBrake brake lever. You will need to pair the products one after the other, according to the procedure indicated in the lighting instructions.
Yes. Watch the tutorial video, further up on this page.
They fit most helmets. If you can stick the metal backing to your headset, that means you can use them on it. Here are the dimensions of the metal headphone stand: 2.3 cm high x 6 cm wide.
Yes quite. We sell additional metal bracket sets on our site.
The hanging system is patented. It is a combination of magnetism and mechanical fixation. So, with the combination of the two, we are confident enough to tell you that if the metal support is correctly stuck to the helmet (especially not upside down) and that the TURN or LUM lighting is correctly attached to the support (see the instructions ), there is no risk of loss.
No, there is no charger in the box. Only a USB cable. Quite simply because we believe that there was no need to add another charger into your daily life, make you pay more for such an item that most of you already have and preserve the environment by not providing not an unnecessary device.
Write to us, we will respond within 24 hours to help you as best as possible.