Ce produit est assez rare. Sac acheté pour un étudiant , plus besoin de transporter son.casque en cours. Super achat !
Très utile
Et facile d’utilisation. Je recommande
OXIMOTE - Tutorials
How to change the OxiMote battery?
A central LED will light red when you use the remote control, and it is time to change the battery. A CR2032 battery gives 6 months to 1 year of autonomy.
How to install the OxiMote on a handlebar?
2 short elastics and one long elastic are provided, to cover all sizes of existing handlebars or grips.
How to start warning lights?
Press both buttons at once, and release them.
How to pair an OxiMote with a Turn or Life?
You can connect up to 5 remote controls (OxiMote / OxiBrake combined) to the same lighting.
How to delete pairings / return Turn / Lum / Life to factory mode?
The reset function allows the lighting to “forget” the pairing with the OxiBrake or OxiMote remote controls. It also resets the lighting (sound in normal mode, etc.) To do this, start pairing, and press the button 3x quickly once the LED in the center starts flashing orange.
Need help ?
When the red LED lights up or flashes, it is time to change the OxiMote's CR2032 battery. See the dedicated tutorial video.
A 2032 battery is required to use the OxiMote remote control. This battery is supplied in the box. It can be replaced by removing the 3 screws located on the back of the remote control using a Phillips screwdriver. Everything is indicated in the instructions.
We chose elastic straps to secure the remote because we knew it could be the most universal way to do it. But we have innovated by offering the possibility of using 2 straps instead of just one to be sure that our remote control fits any handlebar. That said, you can attach your remote control to handlebars up to 32 mm in diameter without any problem.
No. The Bloom and Blinxi are not in the OXI-Wireless range. These are two older generation lights. It is not possible to connect an OxiMote. Contact us directly if you have lost, or have a problem with your Bloom or Blinxi remote control.
Yes. You can pair as many TURN lights as you want to a single OxiMote remote control. You will need to pair the products one after the other, according to the procedure indicated in the lighting instructions.
Write to us, we will respond within 24 hours to help you as best as possible.