Super casque il est beau léger les lumière sont top et même avec mes lunettes la visière ne me dérange pas
Fonctionne très bien avec mon nouveau casque. J’apprécie le fait de pouvoir faire des appels de phares 😉
TURN - Tutorials
How to charge the Turn?
Lift the silicone cap at the bottom of the product and plug in a Micro-USB B cable, like the one supplied with the product. The TURN works with conventional 5V USB charging.
How to start Hazard lights?
Press both buttons simultaneously.
How do I know the remaining battery level?
Each time you turn on the product, the central LED gives you an indication of the battery level: green, there is enough battery remaining. Red, it's time to think about recharging it.
How to install the metal plate on a helmet?
The metal plate attaches with its integrated 3M tape to a smooth surface of an urban helmet. If you don't have a smooth surface, look at our "universal fastener".
How to pair a Turn with an OxiMote?
You can connect up to 5 remote controls (OxiMote / OxiBrake combined) to the same lighting.
How to pair a Turn with an OxiBrake?
You can connect up to 5 remote controls (OxiMote / OxiBrake combined) to the same lighting. Please note, the Turn only has the "Stop Light" function and not "Headlight Flash" because it only has red lighting.
How to change / turn off the turn signal sound?
With the lighting "off", press the power button and hold it until you hear a "beep" or after 5s. Then you can release, the next sound mode is engaged and saved. There are 3 modes: normal, strong, off. Continue the manipulation to return to the original mode.
How to put a Turn at the front?
The Turn does not have white light, only red and the indicators. But you can deactivate the red light, and reverse the direction of the indicators to hang it on the front of a Bike. See below.
How to delete pairings / return Turn to factory mode?
The reset function allows the lighting to “forget” the pairing with the OxiBrake or OxiMote remote controls. It also resets the lighting (sound in normal mode, etc.) To do this, start pairing, and press the button 3x quickly once the LED in the center starts flashing orange.
Need help ?
Other frequently asked questions
Details on Lighting Modes
Overade Turn & Brake offers you 5 red lighting modes which allow you to adapt your bicycle helmet lighting to the light and dangerous conditions of urban traffic.
- night steady: 9 lumens, 16 hours of battery life
- day steady: 35 lumens, 7h30 battery life
- pulse: 90 lumens, 8 hours of autonomy
- night flash: 9 lumens, 21 hours of battery life
- day flash: 50 lumens, 8 hours of battery life
The little extra? When you turn off the product, the last mode remains in memory.
The Overade Lum or the Overade Turn work with the same patented mechanical-magnetic grip.
- For the first installation I remove the film, and stick my magnetic support to the back of the helmet.
- Then to install the lighting, I tilt it and insert it onto the small teeth.
- I release it: it is attracted and frozen by the magnets.
Yes. We paid great attention to this specific point, because we know that users also ride on rainy days. For us, this is an essential feature!
No. The Turn (or all our other lights) are made for everyone. Today, you have many more ways to get around cities: on electric scooters, on monowheels, on skateboards... All these users, as well as cyclists, must be visible in traffic. And they also need to be able to indicate their direction, to be more predictable and therefore safer. Our lights are therefore aimed at all road users, whatever their means of travel.
Of course ! We created our lighting so that you are visible but also predictable in traffic. And day mode is made for that. Using this mode, only the indicators and the Brake Light are activated and they are bright enough to be visible.
A very powerful flash mode is also widely visible from afar, even in direct sunlight.
Yes quite. We sell additional media sets on our site.
The Turn's hanging system is patented. It is a combination of magnetism and mechanical fixation. So, with the combination of the 2, we are confident enough to tell you that if the support is correctly glued to the helmet (and especially not upside down) and that the Turn is correctly attached to the support, there is no risk of loss.
The TURN lighting has 5 red lighting modes, a 6th mode called “day mode”, and right/left turn signals.
The LUM lighting has 5 red lighting modes, a 6th mode called “day mode”, as well as 3 white lighting modes in order to be positioned forward.
The power and autonomy of the LUM and TURN lighting vary depending on the lighting modes. The autonomy is between 6:30 and 21 hours and the maximum power is 100 lumens.
No. When you buy TURN and LUM lights in a pack with other products (OxiMote remote control or OxiBrake brake handle), they are already paired together so you won't have to do anything. However, you can purchase additional products. In this case you will have to pair them. The entire pairing procedure, very simple, is described precisely in the product instructions. Furthermore, no application is necessary to
pairing and for the use of TURN and LUM lighting.
Yes. You can pair as many TURN lights as you want to a single OxiMote remote control. You will need to pair the products one after the other, according to the procedure indicated in the lighting instructions.
Yes. You can pair as many TURN and LUM lights as you want to a single OxiBrake brake lever. You will need to pair the products one after the other, according to the procedure indicated in the lighting instructions.
Yes. Watch the tutorial video, further up on this page.
They fit most helmets. If you can stick the metal backing to your helmet, that means you can use them on it. Here are the dimensions of the metal headphone stand: 2.3 cm high x 6 cm wide.
Yes quite. We sell additional metal bracket sets on our site.
The hanging system is patented. It is a combination of magnetism and mechanical fixation. So, with the combination of the two, we are confident enough to tell you that if the metal support is correctly stuck to the helmet (especially not upside down) and that the TURN or LUM lighting is correctly attached to the support (see the instructions ), there is no risk of loss.
No, there is no charger in the box. Only a USB cable. Quite simply because we believe that there was no need to add another charger into your daily life, make you pay more for such an item that most of you already have and preserve the environment by not providing not an unnecessary device.
Another problem ?
Write to us, we will respond within 24 hours to help you as best as possible.